Quick App
Heatit WiFi6 Thermostat V 1.8
Download09.06.2026 08:22:03
09.06.2026 14:41:51
6
This Quick App is compatible with the following products:
1. Heatit WiFi Thermostat Black Matt
2. Heatit WiFi Thermostat White RAL 9003
3. Heatit WiFi Thermostat White RAL 9010
2. Heatit WiFi Thermostat White RAL 9003
3. Heatit WiFi Thermostat White RAL 9010
Main functionality
This QA is 100% compatible with temperature zones, see picture 1. Thermostat Mode Heat and Off. It has power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child devices is hidden. You can change the thermostat mode and sensor mode in UI.
Main changes V 1.8
1. Added auto discovery2. Added link to this document in consol log.
3. BugFixes.
4. Removed drop down list: Sensor mode. ++
Installation.
1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Wait 30 seconds for auto discovery to find the new device. If auto discovery does not find a new device, you can set the IP address yourself. Set the IP address of the Heatit Thermostat in QA Variable IpAddress. See picture 3. You can find the IP address in the MyHeatit app, see picture 4. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.
Main device:
1. Heatit WiFi Thermostat (Thermostat with Heat and Off mode, as well as power meter and energy meter)
Child devices:
2. Internal Temperatur
3. Floor Temperatur (If floor sensor is connectd)
4. External Temperatur (If external sensor is connectd)
Quick App variables:
1. SensorMode.
2. MacAddress. By default, this is set to Get for auto discovery. Do not change. Se picture 2.
3. IpAddress. By default, this is set to Get for auto discovery. You can set this variable manualy to the IP address of the Heatit WiFi6 Thermostat. QA will automatically look up the MacAddress and set it, and use this later. You fiend the Ip address in the MyHeatit app. Se picture 4
4. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi6 Thermostat, defaul every 60 seconds.
For more information see older versions:
1. Heatit WiFi6 Thermostat V 1.0 - All in one
2. Heatit WiFi6 Thermostat V 1.1 - All in one
3. Heatit WiFi6 Thermostat V 1.2 - All in one
5.
6. Heatit WiFi6 Thermostat V 1.4 - All in one
7. Heatit WiFi6 Thermostat V 1.5 - All in one
Picture 1: This QA is 100% compatible with temperature zones
Picture 2: Auto Discovery. Quick App Variabel MacAddress and IpAddress set to "Get". Searches for new devices connected to the wifi network automatically.
Picture 3: Auto Discovery found new WiFi6 Thermostat Device.
Picture 4. You find the IP Address in the MyHeatit App.
Download