Quick App
Heatit WiFi6 Thermostat V 1.0 - All in one
Download07.01.2025 08:42:30
09.01.2025 10:29:46
31
Main functionality
This QA is 100% compatible with temperature zones, See picture 4. Thermostat Mode Heat and Off. It has power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child device is hidden. Nice if it is not in use in the summer. You can change the thermostat sensor mode in UI.
Installation.
1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit Thermostat in QA Variable IP Address. See picture 5. You can find the IP address in the MyHeatit app, see picture 6. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.
Main device:
1. Heatit WiFi Thermostat (Thermostat with Heat and Off mode, as well as power meter and energy meter)
Child device:
2. Temperatur
Quick App variables:
1. MAC Address. By default, this is set to Get. Do not change.
2. IP Address. Set this variable to the IP address of the Heatit WiFi Panel Heater. QA will automatically look up the MAC Address and set it, and use this later
3. Temp Sensor. You can change this in UI. This is thermostat sensor mode.
4. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Panel Heater.
Thermostat sensor mode, you can change this in UI, see picture 3:
0. F: Floor Sensor. The child device Temperatur shows floor temperature.
1. A: Internal room sensor. The child device Temperatur shows internal room temperature.
2. AF: Internal room sensor + Floor sensor. The child device Temperatur shows internal room temperature + floor temperature / 2 .
3. A2: External room sensor. The child device Temperatur shows external temperature.
4. A2F: External room sensor + Floor sensor. The child device Temperatur shows external room temperature + floor temperature / 2 .
5. PWER Not implementetd. Power regulator mode (no sensor used)
Picture 1: Maine device and Child.
Picture 2. New in V 1.1 Show if heater is online or not.
Picture 3:
Picture 4: This QA is 100% compatible with temperature zones
Picture 5: Enter the IP Address and Click save.
Picture 6. You find the IP Address in the MyHeatit App.
Download