Quick App

This Quick App is compatible with the following products:

1.  Heatit WiFi WM Dimmer
 
 

Main functionality

This QA is 100% compatible with heatit WiFi WM Dimmer. The QA has power meter and energy meter. It is possible to set favorite position. You can set auto turn off, and control the WM Dimmer levels. You can turn it on and off.

Main Change V 1.5

Auto discovery improvment set both mac and ip address when new device is found. Searches for new devices on the WiFi network when the Quick App variables MacAddress and IpAddress are set to "Get". When the Quick App finds a new wm dimmer, it checks if a Quick App with the same Mac address has already been registered, if not, it sets the name and the, MacAddress and IpAddress. See picture 2 and 3. Added link to this documentation in consol log. Added reconnect mapping Mac To new IP on response: No route to host.

Installation. 

1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Wait 30 seconds for auto discovery to find the new device. If auto discovery does not find a new device, you can set the IP address yourself. Set the IP address of the Heatit WM Dimmer in QA Variable IpAddress. See picture 3. You can find the IP address in the MyHeatit app, see picture 4. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.