Quick App

Main functionality

1. On / Off, Auto Off. See picture 1.
2. Power metring. See picture 4.
3. Energy metring. See picture 4.
4. Auto mapping of MAC address to IP address.
6. Auto reconnecting by MAC Address if connection to WiFi Plug is lost.
7. Printing WiFi strength in consol if changed.

Main Change V 1.4

Auto discovery. Searches for new devices on the WiFi network when the Quick App variables MacAddress and IpAddress are set to "Get". When the Quick App finds a new wall plug, it checks if a Quick App with the same Mac address has already been registered, if not, it sets the name and the, MacAddress and IpAddress. See picture 2 and 3. Added link to this documentation in consol log. Added reconnect mapping Mac To new IP on response: No route to host.

Quick App variables:

1. MacAddress. By default, this is set to Get. Do not change. It will get the Mac address automatically.
2. IpAddress. By default, this is set to Get this makes the Quic App search for new devices automatically. You can manually set this to the WiFi Plug IP address  for more info see: Heatit WiFi Plug V 1.3 . 
3. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Plug.

For more info see older versions:

1. Heatit WiFi Plug V 1.1 

2. Heatit WiFi Plug V 1.2 
3. Heatit WiFi Plug V 1.3

Installation

1. Download this Quick App and install it.
2. Change the Quick App Variabel IpAddress to the IP Address of the WiFi Plug or use auto discovery.

Enjoy :o)

Picture 1:

Picture 2: Auto Discovery. Quick App Variabel MacAddress and IpAddress set to "Get".  Searches for new devices connected to the wifi network automatically.

Picture 3: Auto Discovery found new WiFi Plug Device.

Picture 4. Energy consumption and power consumption