Quick App

Plug And Play.

This Quick App requires heatit renergy V 4 or newer

You can set an alarm at any time and choose which days it should run and select duration, action, and choose lights and switches to control.

Installation:

1. Download this Quick App.
2. In the Web UI under Home Center -> Click Add Device -> Other -> Upload File
3. Upload this Quick App.
4. Configure this Quick App.

1. Set the time and select the days you want (multi select) the Quick App changes name automatically. See picture 1:

1. Monday
2. Tuesday
3. Wednesday
4. Thursday
5. Friday
6. Saturday
7. Sunday

2. Select the alarm duration you want (see picture 2)

1. 5 seconds
2. 30 seconds
3. 1 minute
4. 5 minutes
5. 10 minutes

6. 15 minutes 

 

3. Select the action you want in the select list (see picture 2)

1. Turn On (duration does not apply)
2. Turn Off (duration does not apply)
3. Turn On and Off after alarm (duration applies - turns Off after selected duration)
4. Turn Off and On after alarm (duration applies - turns On after selected duration)

4. Select all lights you want to control (multi select). See picture 2 and 3

The Quick App shows all lights in the room it is installed in. If you change the room the Quick App will re-load all lights in the room to the Quic App.

5. Select all switches you want to control (multi select). See picture 2 and 3

The Quick App shows all switches in the room it is installed in. If you change the room the Quick App will re-load all switches  in the room to the Quic App.

6. Select the language you want in the select list. See picture 2 

1. Dutch
2. English
3. Finnish
4. Norwegian
5. Polish

 

You can also make a scene and use this Quick App as trigger. See picture 4

1. In scenes view select Device -> Single as condition.

2.  Choose the room and this Quick App as condition.
2. Choose State -> Sensor triggered
3. Check the trigger and us as trigger
4. Choose what you want to do
Enjoy :o)

For more info se older versions

1. Alarm Clock V 1.1

Picture 1: The Alarm Clock Quick App in Yubii Home Mobil App.

Picture 2: Select lights and switches located in the room where the Quick App is installed. Choose language.

Picture 3: Changing room. Lists lights and switches in the room you select.

Picture 4: Alarm Clock Scene. Device -> Single and choose this Quick App as condition. Choose State -> Sensor triggered and Use as trigger.