Quick App

Heatit WiFi Panel Heater V 2.0

Created at
28.05.2026 09:59:10

Last update
28.05.2026 12:07:17

Downloads
8

This Quick App is compatible with the following products:

This QA is 100% compatible with temperature zones, See picture 4. Thermostat Mode Heat and Off. It has power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child device is hidden. Nice if it is not in use in the summer

Main change this version V 2.0

Auto discovery. Searches for new devices on the WiFi network when the Quick App variables MacAddress and IpAddress are set to "Get". When the Quick App finds a new panel heater, it checks if a Quick App with the same Mac address has already been registered, if not, it sets the name and the, MacAddress and IpAddress. See picture 5 and 6.

For more information se older version:

1. Heatit WiFi Panel Heater V 1.0
2. Heatit WiFi Panel Heater V 1.1
3. Heatit WiFi Panel Heater V 1.2
4. Heatit WiFi Panel Heater V 1.3
5. Heatit WiFi Panel Heater V 1.4
6. Heatit WiFi Panel Heater V 1.5
7. Heatit WiFi Panel Heater V 1.6
8. Heatit WiFi Panel Heater V 1.9

Installation.

1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit WiFi Panel Heater in QA Variable IP Address. See picture 5. You can find the IP address in the MyHeatit app, see picture 5. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.

Main device:

1. Heatit WiFi Panel Heater (Thermostat with Heat and Off mode, as well as power meter and energy meter)

Child device:

2. Temperatur

Quick App variables:

1. MacAddress. By default, this is set to Get. Do not change.
2. IpAddress. By default, this is set to Get this makes the Quic App search for new devices automatically. You can manually set this to the heater IP address. It will then retrieve the Mac address automatically
3. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Panel Heater.

Picture 1: Main device and Child.

Picture 2. New in V 1.1 Show if heater is online or not.

Picture 3:

Picture 4: This QA is 100% compatible with temperature zones

Picture 5: Auto discovery. Quick App variabel MacAddress and IpAddress is set to Get. Quick App searching for new devices on the WiFi.

Picture 6. The Quick App has found a new device. The name and MacAddress and IpAddress is set.

Download