Quick App
Heatit WM Dimmer V 1.4
Download13.05.2026 15:04:19
13.05.2026 15:08:41
16
This Quick App is compatible with the following products:
1. Heatit WiFi WM Dimmer
Main functionality
This QA is 100% compatible with heatit WiFi WM Dimmer. The QA has power meter and energy meter. It is possible to set favorite position. You can set auto turn off, and control the WM Dimmer levels. You can turn it on and off.
Main Change V 1.4
1. BugFix. When IP adress is not correct the Quick App Crases. Fixed
Installation.
1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit WM Dimmer in QA Variable IP Address. See picture 2 and 3. You can find the IP address in the MyHeatit app, see picture 3. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.
Main device:
1. WM Dimmer (Multilevel switch, as well as power meter and energy meter)
Quick App variables (See picture 5):
1. MAC Address. By default, this is set to Get. Do not change.
2. IP Address. Set this variable to the IP address of the Heatit WiFi Thermostat. QA will automatically look up the MAC Address and set it, and use this later
3. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi WM Dimmer.
Picture 1: Main device.
Picture 2: Enter the IP Address and Click save.
Picture 3. You find the IP Address in the MyHeatit App.
Download