Quick App - Renergy ™

Quick App

Heatit WiFi Panel Heater V 3.0

Download

Created at
01.10.2026 08:38:48
Last update
01.10.2026 14:58:02
Downloads
7

This Quick App is compatible with the following products:

1. Heatit WiFi Panel Heater


This QA is 100% compatible with temperature zones, See picture 4. Thermostat Mode Heat and Off. It has  power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child device is hidden. Nice if it is not in use in the summer


Main change this version V 3.0

Uses  MyHeatit Provisioning V 1.0 for configuration and setup


For more information se older version:
1. Heatit WiFi Panel Heater V 1.0
2. Heatit WiFi Panel Heater V 1.1
3. Heatit WiFi Panel Heater V 1.2
4. Heatit WiFi Panel Heater V 1.3 
5. Heatit WiFi Panel Heater V 1.4 
6. Heatit WiFi Panel Heater V 1.5  
7. Heatit WiFi Panel Heater V 1.6 
8. Heatit WiFi Panel Heater V 1.9 
9. Heatit WiFi Panel Heater V 2.0 
10. Heatit WiFi Panel Heater V 2.1
11. Heatit WiFi Panel Heater V 2.2 
12. Heatit WiFi Panel Heater V 2.3 Uses Auto discovery


Installation. 
1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit WiFi Panel Heater in QA Variable IP Address. See picture 5. You can find the IP address in the MyHeatit app, see picture 5. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.

Main device:

1. Heatit WiFi Panel Heater (Thermostat with Heat and Off mode, as well as power meter and energy meter)

Child device:

2. Temperatur


Quick App variables:

1. MacAddress. By default, this is set to Get. Do not change.
2. IpAddress. By default, this is set to Get. You can manually set this to the heater IP address. It will then retrieve the Mac address automatically
3. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Panel Heater.


Picture 1: Main device and Child.


Picture 2. New in V 1.1 Show if heater is online or not.



Picture 3:



Picture 4: This QA is 100% compatible with temperature zones



Picture 5: Uses MyHeatit Provisioning V 1.0. Quick App when MacAddress is set to Get. 



Download