Quick App

Main functionality

1. On / Off, Auto Off. See picture 1.
2. Power metring. See picture 4.
3. Energy metring. See picture 4.
4. Auto mapping of MAC address to IP address.
6. Auto reconnecting by MAC Address if connection to WiFi Plug is lost.
7. Websocket.

Main Change V 1.7

This Quick App uses Websocket and responds immediately to changes in on and off status of the physical wall plug as well as power metering.  Bug in v 1.6 Beta fixed: Out of memory on HC3L on auto disecovery, made all http clients local. This quick app also have websocket heartbeat implemented. If no heartbeat is registered within 2 minutes, the Quick App shows offline and will automatically reconnect when the wall plug is plugged back in again. Energy metering is calculated in then Quit App on power metering change and time use. This Quick App shows WiFi strength on startup in console log.

Quick App variables:

1. MacAddress. By default, this is set to Get. Do not change. It will get the Mac address automatically.
2. IpAddress. By default, this is set to Get this makes the Quic App search for new devices automatically. You can manually set this to the WiFi Plug IP address  for more info see: Heatit WiFi Plug V 1.3 . 

For more info see older versions:

1. Heatit WiFi Plug V 1.1 

2. Heatit WiFi Plug V 1.2 
3. Heatit WiFi Plug V 1.3 
4, Heatit WiFi Plug V 1.4 
5. Heatit WiFi Plug V 1.5
6. Heatit WiFi Plug V 1.6 Beta

Picture 1:

Picture 2: Auto Discovery. Quick App Variabel MacAddress and IpAddress set to "Get".  Searches for new devices connected to the wifi network automatically.

Picture 3: Auto Discovery found new WiFi Plug Device.

Picture 4. Energy consumption and power consumption