Quick App - Renergy ™

Quick App

Heatit WiFi Panel Heater V 1.9

Download

Created at
21.05.2026 08:21:22
Last update
21.05.2026 08:25:58
Downloads
13

This Quick App is compatible with the following products:

1. Heatit WiFi Panel Heater


This QA is 100% compatible with temperature zones, See picture 4. Thermostat Mode Heat and Off. It has  power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child device is hidden. Nice if it is not in use in the summer


Main change this version V 1.9

1. Fixed QA name.


Main change version V 1.8

1. Fixed QA variable names. MAC Address -> MacAddress, IP Address -> IpAddress, allowing editing.
2. Added reconnecting if IP changed by MAC also on response: No route to host
3. Added JSON validation.


For more information se older version:
1. Heatit WiFi Panel Heater V 1.0 - All in one
2. Heatit WiFi Panel Heater V 1.1 - All in one
3. Heatit WiFi Panel Heater V 1.2 - All in one
4. Heatit WiFi Panel Heater V 1.3 - All in one 
5. Heatit WiFi Panel Heater V 1.4 - All in one 
6. Heatit WiFi Panel Heater V 1.5 - All in one 
7. Heatit WiFi Panel Heater V 1.6 - All in one 


Installation. 
1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit WiFi Panel Heater in QA Variable IP Address. See picture 5. You can find the IP address in the MyHeatit app, see picture 5. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.

Main device:

1. Heatit WiFi Panel Heater (Thermostat with Heat and Off mode, as well as power meter and energy meter)

Child device:

2. Temperatur


Quick App variables:

1. MAC Address. By default, this is set to Get. Do not change.
2. IP Address. Set this variable to the IP address of the Heatit WiFi Panel Heater. QA will automatically look up the MAC Address and set it, and use this later.
3. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Panel Heater.


Picture 1: Maine device and Child.


Picture 2. New in V 1.1 Show if heater is online or not.



Picture 3:



Picture 4: This QA is 100% compatible with temperature zones



Picture 5: Enter the IP Address and Click save.


Picture 6. You find the IP Address in the MyHeatit App.



Download