Quick App

Heatit WiFi Thermostat V 1.2 - All in one

Created at
1/9/2025 8:52:34 AM

Last update
1/14/2025 8:21:07 AM

Downloads
47

This Quick App is compatible with the following products:

1. Heatit WiFi Thermostat Black Matt
2. Heatit WiFi Thermostat White RAL 9003
3. Heatit WiFi Thermostat White RAL 9010

Main functionality

This QA is 100% compatible with temperature zones, see picture 4. Thermostat Mode Heat and Off. It has power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child devices is hidden. You can change the thermostat mode and sensor mode in UI, see picture 3.

Main change in v 1.2

Now shows child device for floor, and external sensor if connected, some bugfixes. It is now also possible to hide internal sensor, child device.

Main change in v 1.1

Now shows child device for temperature floor sensor, and external temperature sensor if they are connected to the thermostat (see picture 1). The thermostat checks if the floor sensor and or external sensor are connected every time it goes from offline to online. This means that it is turned off physically via e.g. a fuse. It also only updates the temperature if it changes and it remembers the last measured temperature. Time of change is shown in the log field of the child device. This version also updates the sensor status in QA if it changes physically on the thermostat.

Installation.

1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit Thermostat in QA Variable IP Address. See picture 5. You can find the IP address in the MyHeatit app, see picture 6. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.

Main device:

1. Heatit WiFi Thermostat (Thermostat with Heat and Off mode, as well as power meter and energy meter)

Child devices:

2. Internal Temperatur
3. Floor Temperatur (If floor sensor is connectd)
4. External Temperatur (If external sensor is connectd)

Quick App variables:

1. MAC Address. By default, this is set to Get. Do not change.
2. IP Address. Set this variable to the IP address of the Heatit WiFi Thermostat. QA will automatically look up the MAC Address and set it, and use this later
3. Temp Sensor. You can change this in UI. This is thermostat sensor mode.
4. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Thermostat.

Thermostat sensor mode, you can change this in UI, see picture 3:

0. F: Floor Sensor.
1. A: Internal room sensor.
2. AF: Internal room sensor + Floor sensor.
3. A2: External room sensor.
4. A2F: External room sensor + Floor sensor.
5. PWER Not implementetd. Power regulator mode (no sensor used)

For more information see older versions:

1. Heatit WiFi6 Thermostat V 1.0 - All in one
2. Heatit WiFi6 Thermostat V 1.1 - All in one

Picture 1: Main device and Child devices.

Picture 2. Shows if thermostat is online or not.

Picture 3: Sensor Mode.

Picture 4: This QA is 100% compatible with temperature zones

Picture 5: Enter the IP Address and Click save.

Picture 6. You find the IP Address in the MyHeatit App.

Download