Quick App
Heatit WiFi6 Thermostat V 1.1 - All in one
Download1/8/2025 12:34:22 PM
1/9/2025 12:32:33 PM
28
The QuickApp is compatible with the following products.
1. Heatit WiFi6 Thermostat Black Matt
2. Heatit WiFi6 Thermostat White RAL 9003
3. Heatit WiFi6 Thermostat White RAL 9010
Main change in v 1.1
Now shows child device for temperature floor sensor, and external temperature sensor if they are connected to the thermostat (see picture 1). The thermostat checks if the floor sensor and or external sensor are connected every time it goes from offline to online. This means that it is turned off physically via e.g. a fuse. It also only updates the temperature if it changes and it remembers the last measured temperature. Time of change is shown in the log field of the child device. This version also updates the sensor status in QA if it changes physically on the thermostat.
Main functionality
This QA is 100% compatible with temperature zones, See picture 4. Thermostat Mode Heat and Off. It has power meter and energy meter. It also has support for enabling and disabling QA. If it is disabled, the child device is hidden. Nice if it is not in use in the summer. You can change the thermostat sensor mode in UI.
Installation.
1. Download this file.
2. On the HC3/Yubii Home: Click Add Device -> Other Device -> Upload File. Select the downloaded file and click OK
3. Once QuickApp is installed: Set the IP address of the Heatit Thermostat in QA Variable IP Address. See picture 5. You can find the IP address in the MyHeatit app, see picture 6. Once you have entered the IP, the QA itself retrieves the MAC address and uses this later to look up the IP address.
Main device:
1. Heatit WiFi Thermostat (Thermostat with Heat and Off mode, as well as power meter and energy meter)
Child device:
2. Internal Temperatur
3. Floor Temperatur (If floor sensor is connectd)
4. External Temperatur (If external sensor is connectd)
For more information see older version:
1. Heatit WiFi Thermostat V 1.0 - All in one
Quick App variables:
1. MAC Address. By default, this is set to Get. Do not change.
2. IP Address. Set this variable to the IP address of the Heatit WiFi Thermostat. QA will automatically look up the MAC Address and set it, and use this later
3. Temp Sensor. You can change this in UI. This is thermostat sensor mode.
4. RefreshInSec. Specify how often this QA checks for changes on the physical Heatit WiFi Panel Heater.
Thermostat sensor mode, you can change this in UI, see picture 3:
0. F: Floor Sensor.
1. A: Internal room sensor.
2. AF: Internal room sensor + Floor sensor.
3. A2: External room sensor.
4. A2F: External room sensor + Floor sensor.
5. PWER Not implementetd. Power regulator mode (no sensor used)
Picture 1: Maine device and Child devices.
Picture 2. New in V 1.1 Show if heater is online or not.
Picture 3:
Picture 4: This QA is 100% compatible with temperature zones
Picture 5: Enter the IP Address and Click save.
Picture 6. You find the IP Address in the MyHeatit App.
Download